Welcome to Gashanger Hobbies/GlobalRC
The Wots Wot Foam-E makes for a perfect all round sports foam aircraft. The Wots Wot Foam-E combines the slow speed characteristics of the Wot4 Foam-E and the precision and 'locked in feel' of the Acrowot Foam-E. The Wots Wot Foam-E has been specifically designed to suit a popular 3S 2200mAh Li-Po battery resulting in a model that will fit in a hatchback car boot fully assembled! For a little more flight time, try the Hi-Energy 2700mAh pack instead.
The power system consists of a higher power 920kv outrunner brushless motor with 40A brushless ESC that really packs a punch giving the airframe over 1:1 power to weight ratio! Using a popular 2200mAh battery the duration is approximately 8 minutes.
Supplied in RX ready format the four 9 gram micro servos, outrunner brushless motor and 40A ESC come pre-installed ready to connect up to your choice of receiver and li-Po battery.
Using the latest in foam moulding technology you will notice the edges are very crisp and sharp without the weight penalty of a denser foam. The control surfaces use 'live' style moulded foam hinges but they also have plastic hinges moulded into the foam for extra security.
Assembly is easy and requires only a cross head screwdriver. It's so quick it takes longer to fit the decals than to assemble the airframe!
In the air biplanes are associated with slow scale flight but not the WotsWot, thanks to four large ailerons the roll rate is fast and authoritive and the short moment of the design gives great elevator and rudder power. The Wots Wot really excels during slow speed flight and can be really docile with low rates on. Up the rates and open the throttle for flicks, spins and knife edge loops are more! The stall is benign and thanks to the biplane configuration it really slows down nicely for landing.
• Foam Hinge Line with Plastic Hinges Moulded-In
• Crisp & Precise Foam Mouldings
• Carbon Re-Inforced Internal Structure
• Easy Wing Assembly
• Removable Tail Wheel
• Tough Aluminium Undercarriage
• Large Colourful Decal Sheet
| Specifications | |
|---|---|
| Material | EPO Foam |
| Propeller | ST 12 x 6 Electric (Inc.) |
| Wingspan | 1000mm (39.37") |
| Length | 945mm (37.2") |
| Weight | 1180g ( 2.6 lbs) |
| Servos | 4 x 9g Micro (Inc.) |
| Radio System | 4 Channel (Required) |
| Connector | 'T' Style Battery Connector |
| Electric Motor | 920kv Outrunner Brushless (Inc.) |
| LiPo | 3S 2200mAh Li-Po (Req.) |
| Speed Controller | 40A Brushless (Inc.) |
Chris Foss' ever popular Wot4 Foam-E Mk2 has been updated into the MK2+. The previous Wot4 Foam-E gained a reputation as one of the best sports models available and the Mk2+ builds on that with numerous new features.
The model comes supplied pre-installed with a powerful brushless outrunner motor, matching 40A, brushless, electronic speed controller and 4 x 9g micro servos. All you need to add is your preferred receiver/transmitter combo and a 3S 2200mAh Li-Po of your choice.
Like the previous version, the Mk2+ only requires minor assembly to get airborne. No glue is required, only a cross headed screwdriver, a 10mm spanner and some double sided tape to mount your receiver.
Buried inside the structure there are numerous changes to the internal design. The tailplane has been re-designed for improved styling with solid tips and inset elevators for improved style and improved control response. The aileron servos now have 'trapped' sockets to make upgrading the servos easy without losing the socket inside the wing! The tail wheel has also been re-designed to be bolted on, allowing easy removal if accidentally broken. The control surfaces use 'live' moulded foam hinges with plastic hinge re-enforcement for extra security and peace of mind. Just like the previous version the control surfaces have carbon fibre re-enforcement for optimal control authority.
The colour scheme has been changed from the previous blue, black and white scheme to a new 'easy to apply' scheme in the yellow, orange and red colours that are synonymous with Chris' classic designs. If you want your Wot4 Foam-E to really stand out, then you can customise it using one of our option decal kits. (Available separately 'Z-CF020/12B' & 'Z-CF020/12C')
The new Mk2+ retains all the flying characteristics that made the previous version so popular. The Wot4 Foam-E Mk2+ has a huge flight range, if you open the throttle you have a 1:1 power to weight ratio perfectly suited to sports aerobatics manoeuvres. Where the Wot4 Foam-E excels is its wide speed range, if you lower the throttle you can fly slowly and use little space. It makes for a perfect first aerobatic model for newer pilots and a really fun sports model for experienced pilots.
• New Bright Colour Scheme
• Pre-Installed Brushless Motor, ESC and 4 x 9g Servos
• Re-Designed Tailplane and Elevator
• Foam 'Live' Hinges with Plastic Hinge Reinforcement
• Modified Internal Structure
• Removable Tail Wheel
• Aluminium Undercarriage
• Option Decal Kits Available
| Specifications | |
|---|---|
| Propeller | 11 x 8" (Inc.) |
| Wingspan | 1205mm (47.4“) |
| Length | 1050mm (41.33“) |
| Weight | 1100g (2.43 lbs) |
| Servos | 4 x 9g Micro (Inc.) |
| Radio System | 4 - 5 Channel (Req.) |
| LiPo | 3S 2200mAh 30C (Req.) |
| Electric Motor | Brushless Outrunner (Inc.) |
| Speed Controller | 40A Brushless (Inc.) |
