10th Aniversary AJ Slick 540 103
  • 10th Aniversary AJ Slick 540 103
  • 10th Aniversary AJ Slick 540 103
  • 10th Aniversary AJ Slick 540 103

10th Aniversary AJ Slick 540 103"

£1,250.00
SKU : 10th_Aniversary_AJ_Slick_540_103_
 

 

Stock Arriving Shortly

  • Wing Span - 103"
  • Length - 100"
  • Height - 27"
  • AUW (dry) - 26-27 lbs.
  • Gas Power - 100cc to 120cc
  • Radio - 8 channel with 8 high torque servos (400 oz./in minimum) & 1 throttle servo

What's in the box:

  • NEW - Carbon-Kevlar plywood construction!
  • NEW - Carbon-Kevlar reinforced landing gear mount!
  • NEW - Carbon-Kevlar reinforced firewall!
  • NEW - Durable, lightweight one piece cowl design!
  • NEW - Canopy complete with cockpit!
  • Pre-hinged, glued and sealed ailerons & elevators
  • High-quality embroidered cloth wing bags & stab bags
  • 5" carbon fiber spinner pre-cut for two blade prop
  • Carbon fiber main landing gear
  • Carbon fiber main wing tube
  • Dual carbon fiber stab tubes
  • Removable horizontal stabs & rudder
  • G10 fiberglass control horns
  • Aluminum standoffs for gas engines
  • Full-length canister tunnel
  • Canister muffler mounts
  • Heavy duty foam wheels with aluminum hubs
  • Heavy duty steel axles
  • Heavy duty pre-drilled wheel pants
  • Pre-drilled & rubber lined landing gear cuffs
  • Firewall drilling templates for common engines
  • Pre-run rudder pull-pull wires
  • High quality ball links & turnbuckles for all connections
  • Extra hardware bag for spares
  • Velcro for fuel tank or battery restraint
  • All airframe components covered in genuine Ultracote (White HANU870, True Red HANU866, Midnight Blue HANU885, Cub Yellow HANU884)
NOTE:  This product is shipped in two separate boxes.
 

Items Needed to complete 

  • 100-120cc Petrol Engine
  • Propeller 28x10 27x11
  • Servos
  • Servo Arms 1.75" x (6)
  • 3.5" Double Arm x (2)

Also needed to complete:

  • (2) x 24" extensions for outer ailerons
  • (2) x 6" extensions for inner aileron
  • (4) x 6" extensions from receiver to each wing
  • (2) x 48" extensions for elevators
  • (2) x 36" extensions for push-pull rudder. None needed for pull-pull.
  • (2) x 24" extension for throttle servo and ignition
  • (6) x 1 3/4" servo arms for elevators & ailerons
  • (2) x 3 1/2" servo arm for rudder pull-pull or 2x 1 3/4" arm for push-pull